Should your garage door happen to slip off of the tracks, you will need to perform garage door repair, or call in a
repair technician to do the job for you. When it comes to garage doors, the safest thing to do is call in the experts unless you are absolutely sure that you can perform the repairs safely. However, if you are sure that you can pop the door back onto its tracks, then here are the basic steps to follow to get your door functional again.
The very first thing you must do for this garage door repair is to stop using the door as soon as you notice a problem, and to disengage your garage door opener. You must also make sure to detach power from the opener so that it cannot be used while you are working on it. This all needs to be done within moments of noticing that there is a problem with the door. Should you forget to disengage the opener, someone who does not know about the problem may try and open the door, causing serious injury to someone in the vicinity, or serious damage to the garage door itself.
If you are not sure how to disengage your garage door, then look for the red rope hanging near the opener itself. Pull it down until it clicks, which unlocks the door from the track. That way, if anyone hits the button for the opener, it won’t open and cause you, or the door, more harm.
What you need to do next for this particular garage door repair is to slowly open up the door until one of the rollers attached to the door is aligned with the area of the track that is causing the problem. Use vice grips to secure the garage door in that spot so that it doesn’t shift up or down on you. Then, you want to take a set of pliers and open the track gently just wide enough to fit the rollers back on. If it is already wide enough, then you can skip this step.
Now, you need to guide the wheels back onto that track carefully. Once the wheels are on, you need to take a small piece of wood and put it on the outside of the open track so it can act as a buffer. With the wood being held in place, use a hammer or a wooden mallet and pound the track to its straightened position again. Go slow and gentle for this part of the garage door repair as you do not want to knock anything loose while you are fixing the door.
From here, you want to remove your pliers or vice grips from the track and help the door lower itself back down to the ground. Go back and power the garage door back up, then hit the button so that the door is reengaged by the track and opener. You want to open and close the door several times at this point in the garage door repair, watching each set of rollers carefully to ensure that the track is tight enough to keep the door in place and ensure there aren’t any other issues with the door. If you notice a part of the track still giving you trouble, start your garage door repair over by disengaging the door and unplugging the power. Then pound that section of track back in and try again.
If you want to be able to avoid this kind of garage door repair in the future, you need to periodically check your garage door track. You want to look for debris that may have gotten stuck in the track, such as dirt, leaves, sticks, and plastic. All of these things could cause your garage door to fall off the track or could result in your door falling off the track again, and would end up with you having to perform this type of garage door repair all over again.
It is never a good idea to perform any type of garage door repair that you are not sure you can do safely. If you have any kind of doubt, you need to call professional garage door repair technicians. They know how to come in, get the job done quickly and safely, and be out of your hair. If you are not completely sure that you can do this type of garage door repair on your own, don’t take the risk.